Top 9 Reducer Barb Tee – Wall Stickers & Murals

As an Amazon Associate I earn from qualifying purchases.

1. UP SHOW

#ad

UP SHOW Coupler Access Tee Reducer Y-Shaped 3 Way Tee Hose Barb Y Manifold Fitting

#adUP SHOW #ad - It has a slip nut so you can tighten it down in any position and easy adjust the angle. For use with plastic or rubber hose, The tee adapter is easy to operate and install, strong sealing for durability and safety. Attach this 3-way diverter valve to shower arm, you can activate spray for shower head only, for hand shower only, or to active spray for both shower head and hand shower. A small piece of plastic that allow you connect two or more air tubing. Easy to use: fittings Work with Crimp Ring or Clamp Connection Methods.

Brand	UP SHOW #ad
Manufacturer	UP SHOW #ad
Part Number	UP SHOW

2. SharkBite

#ad

SharkBite U072LFA Straight Connector Plumbing Female, FNPT, CPVC, 0.5 x 0.5 Inch, Push-to-Connect, 1/2 in, Copper, PEX Fittings

#adSharkBite #ad - Preferred by the pros: A SharkBite coupling meet the same standards for commercial and residential plumbing applications. Made in the usa: Manufactured and tested in the USA.

Note: this product is one side "ptc = push to connect” and the other side is "FNPT = female national pipe thread". Versatile: sharkbite plumbing fittings fit copper, plastic PEX pipe, CPVC, and HDPE pipe with a female to male threaded pipe or fitting. Installs in seconds: no special tools, crimping, soldering, or glue; Just push the adapter to create a watertight union. Lead-free: made of high-quality forged DZR brass that is lead-free.

Brand	SharkBite #ad
Manufacturer	Cash Acme #ad
Height	1.08 Inches
Length	7 Inches
Width	4.5 Inches
Part Number	U072LFA
Model	U072LFA
Warranty	Lifetime

3. SharkBite

#ad

PEX Fittings, SharkBite U362LFA Tee Plumbing Pipe Connector 1/2 In, 1/2-Inch by 1/2-Inch by 1/2-Inch, CPVC, Copper, Push-to-Connect

#adSharkBite #ad - Preferred by the pros: A SharkBite coupling meet the same standards for commercial and residential plumbing applications. Versatile: sharkbite plumbing fittings fit copper, CPVC, plastic PEX pipe, and HDPE and connect all 3 types in any combination. Lead-free: made of high-quality forged DZR brass that is lead-free. Made in the usa: Manufactured and tested in the USA. Installs in seconds: no special tools, soldering, crimping, or glue; Just push the adapter to create a watertight union.

Brand	SharkBite #ad
Manufacturer	Cash Acme #ad
Height	1 Inches
Length	3.5 Inches
Width	2.1 Inches
Part Number	U362LFA
Model	U362LFA
Warranty	Lifetime

4. SuperWhole

#ad

SuperWhole 3/4" Male x 1/2" Female Thread Reducer Bushing Pipe Fitting SS 304 NPT NEW

#adSuperWhole #ad - Shape: reducer Bushing Male x Female. Package include:1 piece x 3/4" male x 1/2" female Thread Reducer Bushing Pipe Fitting SS 304 NPT NEW. Other size is available too, please check it in our store. Material: 304 Stainless steel. Connection:npt-npt. Measurement: 3/4"x1/2".

Brand	SuperWhole #ad
Manufacturer	SuperWhole #ad
Part Number	WJ0061

5. Orbit

#ad

Orbit DripMaster 67431 1/4-Inch Barb Assortment, 30-Pack

#adOrbit #ad - Durable construction provides years of reliable use. For use with 1/4-inch distribution or soaker tubing. Includes: 10 couplings, 5 tees, 10 plugs, and 5 elbows. Includes an assortment of the most commonly used 1/4-inch drip fittings. For outdoor use with cold water only.

Brand	Orbit #ad
Manufacturer	Orbit Underground/Sunmate #ad
Height	5.75 Inches
Length	1 Inches
Width	3.5 Inches
Part Number	67431
Model	67431

6. Watts Premier

#ad

164020 DLA-D, Watts Premier Drain Line Plumbing Adapter

#adWatts Premier #ad - For installation without a dishwasher drain line the 3/8" RO faucet drain line connection can be cut off and installed on the disposal port. Converts for installation with or without a dishwasher drain line connection.

Installation of 3/4" and 7/8" drainlines will require the smaller barbs to be cut off. Unique design reduces noise from air gap faucets and prevents plugging. Universal adapter accommodates 1/2", 5/8", 3/4", and 7/8" dishwasher drain hose with a 3/8" RO drain line Quick Connect for air gap faucets. First barb supports 1/2" and 5/8", second barb supports 3/4", and third barb supports 7/8" dishwasher drain lines. Will require a 3/8” stem to 1/4" qC reducer if the RO System does not have an Air Gap. Uses standard plumbing fittings to meet nationwide code requirements. The product is iapmo/UPC and IPC Listed.

Brand	Watts Premier #ad
Manufacturer	Watts #ad
Height	10 Inches
Length	6 Inches
Width	1 Inches
Part Number	164020
Model	164020

7. SharkBite

#ad

Push-to-Connect, PEX Fittings, Copper, CPVC, MNPT, Male 1/2 in, 0.5 x 0.5 Inch, SharkBite U120LFA Straight Connector Plumbing

#adSharkBite #ad - Lead-free: made of high-quality forged DZR brass that is lead-free. Preferred by the pros: A SharkBite coupling meet the same standards for commercial and residential plumbing applications. Versatile: sharkbite plumbing couplings fit copper, CPVC, and plastic PEX tubing and connect all 3 types in any combination. Made in the usa: Manufactured and tested in the USA. Installs in seconds: no special tools, crimping, soldering, or glue; Just push the adapter to create a watertight union.

Brand	SharkBite #ad
Manufacturer	Cash Acme #ad
Height	6.25 Inches
Length	10.75 Inches
Width	4 Inches
Part Number	U120LFA
Model	U120LFA
Warranty	Lifetime

8. SharkBite

#ad

Coupler, Push-to-Connect, PEX Fittings, CPVC, SharkBite U020LFA Straight Connector Plumbing 1 In, Copper, 1 inch

#adSharkBite #ad - Ball valves, and compression fittings, shutoffs, are safe for potable water lines. Lead-free: made of high-quality forged DZR brass that is lead-free.

Preferred by the pros: All SharkBite fittings meet the same standards for commercial and residential plumbing applications. Made in the usa: all sharkbite valves, clips, joints, and adapters are manufactured and tested in the USA. Installs in seconds: repair with no special tools, crimping, soldering, or glue; Just push to create a quick watertight union with SharkBite pushfit connectors. Versatile: sharkbite plumbing valve fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination.

Brand	SharkBite #ad
Manufacturer	Cash Acme #ad
Height	3 Inches
Length	6 Inches
Width	3 Inches
Part Number	U020LFA
Model	U020LF
Warranty	Lifetime

9. Orbit

#ad

Orbit 56318 Hanging Basket Flex-Mist Watering Kit with Hose-End Timer

#adOrbit #ad - Easy setup: Quick and simple assembly. Water multiple baskets: Save time and hassle by watering up to six hanging baskets at once. Single-port hose-end timer: A variety of programming options does the watering work for you. Conserve water: flexible memory tube allows for precise nozzle placement, so your plants get the most out of every drop of water. No more hand watering: Dedicated lines in your hanging baskets allow them to remain hanging for watering.

Brand	Orbit #ad
Manufacturer	Orbit #ad
Height	3.5 Inches
Length	6.5 Inches
Width	14.38 Inches
Part Number	56318
Model	56318