Top 10 Audio Rack Cabinet – Standing Shelf Units

As an Amazon Associate I earn from qualifying purchases.

1. Pangea Audio


And Components Cabinet, Pangea Audio Vulcan Four Shelf Audio Rack Black Media Stand

Pangea Audio #ad - Super durable – four steel support tubes feature scratch-resistant and resonance-resistant black sand powder coat paint, and dense MDF shelves are wrapped in a special vinyl material that is very easy to clean and resists scratching, scuffing, and most liquids.

Generously-sized shelves – 23. 75" wide, 18" deep, and 0625"-thick contoured shelves give you lots of room for your AV components. Super-rigid rack – this 32"-tall four-shelf audio component rack rigidly supports your components in an open-air design that maximizes component ventilation and makes it easy to install/remove gear.

Modular design – buy and add extra shelves as your AV system grows for up to six shelves in all, thanks to Vulcan's fully customizable modular design. Performance-enhancing options – separately sold options include add-a-shelf Kit with 7" supports, Extended Height 10" Support Tubes for tall gear, Add-On-LP-Storage Shelf Kit for up to 100 vinyl records, and matching Amp Floor Stand.
BrandPangea Audio #ad
ManufacturerPangea Audio #ad
Part NumberPGVULRK
ModelVulcan Audio Rack in Black

2. Monolith


Espresso, Open Air Design, Perfect Way to Organize AV Components, Each Shelf Supports up to 75 Lbs, Monolith 4 Tier Audio Stand XL

Monolith #ad - Unlike most enclosed av cabinets, This sturdy design will ensure your equipment receives plenty of circulating air that will keep them from overheating during use. Additional support bar: attach the provided support bar underneath a shelf for additional structural bracing for your heaviest components.

Each shelf is acoustically Inert and can support up to 75 lbs. While the rigid, while the shelf with the support bar can hold up to 150 lbs. Modular construction: the fully customizable modular design lets you build your rack exactly as tall as needed. One set of steel support tubes are longer, allowing one tier of the stand to accommodate taller components. The perfect way to organize and display your AV components.

Sturdy construction: the four steel support tubes feature a scratch-resistant black powder-coated finish, thick MDF Shelves feature a finish that cleans easily and resists scratches and scuffs. Start with the base and add as many of the 4 shelves as you need. Open air design: the stand is designed with open air shelving for critical airflow, cooling, and ease of access to your components.
BrandMonolith #ad
ManufacturerMonoprice #ad
Height7.5 Inches
Length28.25 Inches
Weight60.2 Pounds
Width20.5 Inches
Part Number139167

3. Nexera


Vision Audio Tower from Nexera, Black

Nexera #ad - Assembly required. Solid and removable back panel allowing for easy wire management and air flow. Adjustable levelers. Designed and made in canada with carb ii/fsc certified particle board and MDF materials. Ships in 24-48H from order date. Matte black lacquer and black melamine. 2 adjustable shelves behind door with glass inserts, perfect to keep your electronics away from dust. Door is reversible and can open from the left or the right.
BrandNexera #ad
ManufacturerNexera #ad
Height34 Inches
Length19 Inches
Weight58 Pounds
Width18.25 Inches
Part Number102306
Warranty1 year limited warranty.

4. Ryan Rove


Entertainment Center, Glass Shelves, Living Room Furniture, Console Shelf and Storage Rack, Cable Management, Wood Espresso, Home Theater System, Ryan Rove Ashton Multi-Level Media Component Stand

Ryan Rove #ad - Beveled, tempered glass shelves with 75 lbs carrying capacity. 9989 durable, scratch and impact resistant, sturdy & strong - made of powder-coated, superior industrial grade steel with MDF wood accents. The smooth surface makes cleaning effortless.

Simply wipe down dust and dirt with a damp cloth. Overall dimensions and weight: dimensions: 26" W x 20" D x 35" H - Weight: 53 lbs. 9989 decorative & efficient - finished with a smooth and elegant appeal that blends with contemporary interior aesthetics. 9989 low maintenance - quick and easy set-up and dismantling makes it a great addition to any room. 9989 versatile & multi functional - this multimedia shelf doubles as an all-around rack that can be utilized for a variety of items.

Open shelves allow air circulation to cool devices and prevent overheating. Use it for plants, books, magazines, and even as a night or TV stand.9989 for storage & display - the interchangeable shelf spacing holds multiple media devices of different dimensions. Also fits audio-video components and accessories from 3 to 33 inches in height.
BrandRyan Rove #ad
ManufacturerRyan Rove #ad
Height35 Inches
Length20 Inches
Weight53 Pounds
Width26 Inches
Part NumberRR1072

5. Bush Furniture


Bush Furniture Buena Vista Media Cabinet in Madison Cherry

Bush Furniture #ad - Buena vista boasts an attractive post-leg design, decorative curved base rails and beveled edge detailing to match contemporary or traditional decor. Tested to bush Furniture Standards for tip stability. Wire management and ventilation slots. Three adjustable shelves for storage flexibility. Framed fluted glass doors protect components from dust.
BrandBush Furniture #ad
ManufacturerBush Industries--DROPSHIP #ad
Height42.2 Inches
Length23.46 Inches
Weight74 Pounds
Width19.68 Inches
Part NumberMY13840-03

6. Pangea Audio


Pangea Audio Vulcan X Four Shelf Audio Rack Rosenut

Pangea Audio #ad - One user said that adding shelves was as easy as changing a light bulb. The steel floor spikes go all the way through the cones and into the bottom shelf tubes for greater strength and better energy transfer from the rack into the floor. Its design features steel support tubes and steel X-braces connected by threaded rods for a super strong and ultra-rigid rack you can assemble in minutes without dipping into your toolbox.

Just flip the vulcan X-Brace upside down to add shelves from the bottom. Open-air design is best for your gear – the open-air design is best for your electronics. Easily expandable - thanks to the modular design, you can conveniently add or remove shelves for as many as six shelves in all as your equipment needs change. The dense mdf shelves are wrapped in a special vinyl material in satin black, or carbon fiber finish.

The design maximizes component ventilation and makes it easy to install or remove gear. Extremely strong design – pangea audio's 32"-tall four-shelf vulcan x-brace Audio Rack provides rock solid support for hi-fi and home theater gear. Extra-thick generously-sized shelves - the x-brace rack holds a system’s worth of electronic components, 18” deep, rosenut, boasting four generously sized 23.75” wide, and extra-thick 19mm-thick. 75” shelves. Innovative cone point feet and spike design – x-brace features innovatively designed cone point feet and spikes.
BrandPangea Audio #ad
ManufacturerPangea Audio #ad

7. Bush Furniture


Bush Furniture Stanford Audio Cabinet

Bush Furniture #ad - Media cabinet features carefully crafted accents designed to impress. Rear access for wire management and concealment. One fixed shelf for stability. Two adjustable shelves for flexibility in storing electronics. Framed tempered glass door protects components from dust.
BrandBush Furniture #ad
ManufacturerBush Furniture #ad
Height60.47 Inches
Length19.57 Inches
Weight106 Pounds
Width25.04 Inches
Part NumberAD53940-03
Warranty1 year.



AS406003GB, FITUEYES 4-Tier AV Media Stand Component Cabinet and Hi-Fi Rack Audio Tower with Height Adjustable Tempered Glass Shelves

FITUEYES #ad - Flat panel tv stand – this media console is ideal for AV component storage around your TV. Sturdy steel frame – fitueyes media tower is made with 8/5/5/5mm tempered safety glass shelves and powder coated metal tubing with scratch-resistant finish.

Adjustable shelves – you can adjust the distance between the two shelves as your need, which provides you a more humanization design. Product dimensions – 23. 6wx17. 9dx29. 1h inch, and Dia 50mm black aluminum tube. It is made for storing stereo equipment, gaming consoles, center speakers, DVD players and streaming devices. Weight capacity – 66/33/33/33 lbs for each shelf from top to the bottom.
ManufacturerFITUEYES #ad
Weight36.3 Pounds

9. Sanus


Heavy Duty Design Holds 400lbs of Audio/Video Components, Features Simple 15-Minute Install & Includes All Hardware, Sanus AV Media Stand with Built-in Cable Mangement & Adjustable Feet

Sanus #ad - Includes all necessary hardware for a quick and easy assembly. Open architecture allows unrestricted airflow, keeping AV equipment at the proper temperature for optimal performance.

Strong and stable, including stereo equipment, gaming consoles, this shelf can support up to 400 lbs. Constructed of hand-sanded, black lacquered shelves and heavy-gauge steel pillars, this AV stand is a versatile storage solution for your home theater or home office. Get a clean, finished look with the attachable cable management system, and ensure stability on any surface with the included adjustable feet and carpet spikes. In 15 minutes, your stand will be ready to use. Of components, streaming devices, turn tables, Blu-ray players, book shelf speakers, printers and other devices.
BrandSanus #ad
ManufacturerTjernlund Products – Audio #ad
Height30.59 Inches
Length20.52 Inches
Weight44.2 Pounds
Width22.48 Inches
Part NumberEFA31-B1

10. VTI


4 Shelf Audio Rack TV Stand up to 27" TVs with Black Frame, Silver Cap/Spikes and Cherry Shelf., VTI BL304SC

VTI #ad - Accommodates up to 27" TV set and three audio / video components. Additional shelf can added or can be used as single shelf unit. Adjustable spikes and foot plates are included to balance unit for different flooring needs. Beautiful two tone frame unit with wire management system. Ready to assemble.
BrandVTI #ad
ManufacturerVTI #ad
Weight44 Pounds