As an Amazon Associate I earn from qualifying purchases.
1. Biantie La #ad
Biantie La 4 Pin RGB Led Light Strip Connectors 10mm Unwired Clips Solderless Adapter Terminal Strip to Wire Extension Connection for 12v Waterproof or Non-Waterproof 5050 Multicolor Led Strip Lights #adBiantie La #ad
- The 4 pin led strip connector suitable for 10mm width SMD 5050 RGB led light strip. One end connect 4-conductor flat extension cable and another end for rgb led strip. Only need to press the stripped wire into the slot to firmly connect and conduct.
Diy led strip to wire connection length you want, 12v, free from the limit of terminal position. Package - include 10pcs of unwired connectors. It avoids the dilemma that other connectors can't pierce the wires or can't be turned on or difficult to reuse.
Not picky about wires - work for 24awg, 20awg solid wire, 22awg, multi-core wire. Compatible with waterproof strips - should peel off covered silicon on the surface around soldering line area, if you want to connect WATERPROOF LED strip light.
These led strip connectors can not work with 8mm led strips. Not contain wires or strip lights. Support up to 5a current carrying - compatible with 5v, no mater strip-to-wire extension or strip-to-strip jumper, 24v led strips, allow you to connect longer LED strips by one LED connector. Connect tape to wire - no soldering, quick and flexible connection.
2. Zhengmy #ad
With Wire Strip Lights 16.4ft LED Strip and Connector Pry for 5050, 20 Pack 4 Pin 10mm Solderless LED Strip Connector Transparent Track Lighting Connectors LED Pin Connector #adZhengmy #ad
- Compatible with most light strips: the led strip light connectors can not only be compatible with 5v, solid wires and multi core wires; Please note that they are not suitable for 3528 LED strips, 12V, 24v led light strips, but also serve for 22 AWG 5 conductor wires and 10mm LED strip lights, 20 AWG wires and 8mm LED strips.
A good combination: the package comes with 1 piece of 16. 4ft light strip cable, useful and practical, 20 pieces of transparent LED strip connectors and 1 piece of connector pry, enough to satisfy your connection needs.
Apply firmly: the led light connectors are made of quality material, tough and safe, sturdy and safe, transparent, which can make your light strips more awesome in reducing the dark area; The LED strip light wire adopts quality tin plated copper material, providing a long term service for you.
Easy to operate: you need to insert the led strip light wire into the guide slot and then press down, align the soldering pads of the light strip surface with the pins on the LED light strip connectors, and check whether the positive and negative poles are correct. Stable and flexible connection: you just connect the LED light wire strip to wires without stripping insulation, which is easy and convenient, soldering and peeling off waterproof cover, saving your time and energy.
|Part Number||Zhengmy-Strip -11|
3. SUPERNIGHT #ad
Strip to Wire Led Lights Connector Good Connection, SUPERNIGHT Led Connectors for Waterproof 0.39in / 10mm RGB 5050 LED Strip Lights, Strip to Strip, 10 Packs 4 Pin LED Strip Connectors #adSUPERNIGHT #ad
- 4 pin led connectors make a quick and good connection when you use, usually there is no need to worry the terrible work if use them correctly. Led connectors for strip lightspackage includes 5 pcs strip to strip connectors and 5 PCs strip to wire connectors.
Easy to useno soldering needed when use to re-connect led strip and wires and no need to peel off silicon cover. Led strip connector kit work for waterproof 039in / 10mm wide smd 5050 rgb light strip and 22-20 AWG solid wire.
Strong and durablehigh quality tin plated copper core and polycarbonate cover, very difficult to break up, much stronger than common connectors. Quick and good connectionideal for connecting strip to strip and strip to wire without stripping insulation, diy the length of led strip lights and AWG wire as you want.
If you want to open the connector, you should insert the tip of your needle nose pliers into the connector and use a blade to open the side clips. So they'll keep a long-time and stable connection. Compatible with5v, as much as 5a r, b 3 channel supported, 12v, g, 24v led strips, which allows you to connect longer LED strips by one connector.
4. Biantie La #ad
Biantie La 4 Pin 10mm LED Strip to Wire Connector RGB Unwired Clips Solderless Adapter Terminal Extension Connection for Multicolor LED Strip Lights 12V 24V Pack of 10 #adBiantie La #ad
- Quick and flexible connection: connect rgb strips to wire without stripping insulation, no soldering. No mater board to wire input or strip to strip jumper, extension distance and angle are no more problems to you. Solid & effective connection: high quality tin plated copper core and PVC plastic wire cover ensure steady, much stronger than old style lights connectors, safety and long-lasting connection, firmly bite through the led light strip, The clear terminal is easier to pierce the wire, and the one-time success rate is higher.
Perfect for non-waterproof or ip65 watereproof led tape light DIY project NO need to peel off silicone cover for the waterproof strips.
The led tape light connectors can not work with 8mm led strips, or 20 awg wire. Free from the limit of terminal position: connect wire by yourself as need, use these rgb 4 pin led connectors with 22 gauge 4 conductor extension cable to get lighting exactly where you want it.
Strong compatability: the led strip connector compatible with 5v, and then buckle the transparent cover to achieve a stable and good connection. Solderless and convenient: simply slot the strip light and 22awg wire into connector and clamp the cover. Suit for 22 awg 4 conductor wire, work for ip20/ IP65 10mm width 5050 RGB 4 Soldering Pads tape light. Fits all 10mm width 5050 RGB LED strips. You only need to align the front side led surface of the light strip with the pins of the connector, 24v led light strips, 12v, solid wire and multi-core wire.
5. RGBZONE #ad
RGBZONE 10Packs 4-Pin RGB LED Light Strip Connectors 10mm Wide Unwired Gapless Solderless Strip to Wire Quick Connectors Adapter for Waterproof or Non-Waterproof SMD 5050 Multicolor LED Light Strip #adRGBZONE #ad
- What you get:10pcs 4pin rgb led connectors, strip to wire quick connection. Easy to use:convenient and easy to use, and the premuim transparent PC material makes your DIY LED light strips project awesome in reducing the dark area.
Specification:those rgb connectors are suitable for connecting waterproof and non-waterproof 10mm wide rgb light strips and 4pin led extension cable.
Rated voltage: 0-36V; Rated current: 5A. Warm tips:please turn the front of the light strip down to make sure the contacts can touch the copper pins of the connector while installing. Working stably:the sharp copper thorn design can directly penetrate the PVC to contact the copper wire, no soldering, no need to strip the wire sheath.
6. JACKYLED #ad
JACKYLED 10-Pack 5050 3528 RGB LED Light Strip Connectors 4-Pin 10mm Wide Solderless Strip to Strip Jumper Extension Wire Angle Connector for Kitchen Cabinet Bedroom DIY LED Strip Project #adJACKYLED #ad
- These led light strips connectors are flexible and durable enough for bending or twisting in any angles without breaking. If you have any issues, inquiries, or need assistance, please feel free to contact us directly. If you need to solder it with light strip cable, you had better use less tin in order to avoid short circuit.
Make sure the strip is properly aligned with the connectormatch the positive terminals. Easy to use: just clasp your prepared led strip section into the led 4 pin connectors to get connected.
Feel free to bend it: our 5050 4 pin led connectors with 17 strand tin-plated oxygen-free copper inside each circuit, the wires are thicker than most of the other rgb led strip jumper in the market, features stronger physical features. And 2 pcs l-shape corner connectors are included for your varied needs.
Note: these led jumpers are only suitable for 10mm 039in wide 4 pin RGB led light strips. Solid & effective connection: one of the cable end contacts of our led strip lights connectors were soldered already, the other side contacts are open to stick in. Strong compatibility: compatible with all 4 pins 5050 rgb LED Strip and 3528 LED Light Strip; compatible with both waterproof and non-waterproof light strips; works with dimmable strip lights.
7. APVTI #ad
20Pcs 4-Pin 10mm RGB LED Light Strip Connectors Strip to Wire Quick Connector LED Extension, Waterproof Transparent LED Adapter Connectors for Track Lighting Connector 5V 12V 24V #adAPVTI #ad
- They can be safely used for a long time. These accessories can be used to extend and connect light strips, you can extend the length of the strip lamp, and the direct head L-Shaped in the kit can be used to realize corner connection. Main functionsthe 4-pin connector can be used for 10mm/04 inch rgb led strip and 22 awg 4-pin wire, which may lead to unsuccessful connection; If the connection is not successful, solid wire and multi-core wire; Tip: not applicable to 8 mm/031 inch led strip; please use standard 22 awg wire for connection; There are some unqualified wires in the market, please observe whether the clip connection contact is in contact with the copper core of the wire.
Reliable and high qualitythese 4-pin led connectors are mainly made of high quality pvc plastic wire cover and tin plated copper core ensure steady, which is much stronger than the old connector.
They are light, not easy to break, not easy to corrode, safety and long-lasting connection. The fireproof nylon shell and high-precision brass connector are durable and powerful.
They firmly bite the LED lamp belt, and durable. Solderless extendable connectorswith this cob led strip connector kit, eliminating the problem of limited space. Widely applicationled terminal strip is light in size and can be widely used in household appliances, electric wall lamps, office desks, bedside lamps, TV background lamps, wardrobes, etc. Easy to useyou need to insert the led light strip into the guide slot of the led light strip adapter, and then press the cover to align the welding pad on the surface of the light strip with the pin on the LED light strip connector; When installing, make the LED bar face down so as to contact the pins of the connector.
8. Zhengmy #ad
Transparent, 40 Packs LED Strip Connector 4 Pin,10 mm LED Connectors for Strip Lights, LED Strip to Wire Connector Waterproof RGB Unwired Clips for Strip Light Gapless Track Lighting Connector #adZhengmy #ad
- Reliable quality: our light strips connectors are made of quality PC material, lightweight but sturdy, not easy to break, safe and reliable, which can be applied for a long time with confidence. Suitable for: these 4 pin led connectors are designed for 10 mm/ 04 inches rgb led strips and 22 awg 4 pin wires, it may cause the card pin to be unable to align with the metal cell, the product is suitable for standard 22 AWG wire; If it is not a standard 22 AWG wire, solid wires and multi core wires; Note: they are not applicable to 8 mm/ 0.
31 inches led strips, thus resulting in unstable connection; Please carefully check the specification before purchasing.
How it works: the metal pins on the solderless LED light connectors pierce the copper contacts on the light strip, ensuring a firm connection even with a slight swing and pull. Abundant quantity: the package comes with 40 pieces of 4 pin led connectors for strip lights in total, such a sufficient quantity can easily meet your connection needs and replacement demands, equipped with 1 opener and 1 black screwdriver to easily pry open the buckle, you can also share them with others in need.
Easy operation: you can simply insert the led light bar light wire into the guide slot, then press the cover down, and check whether the positive and negative poles are correct, and align the surface pad of the light bar with the pins on the LED adapter connector.
9. GXILEE #ad
Include 16.4ft 22 Gauge Led Extension Cable, GXILEE Led Light Connectors, 4 Pin Led Lights Connector for 10mm Wide 2835 5050 RGB Strip 10 Pack, Strip to Wire Connection Without Stripping #adGXILEE #ad
- Easy to install without stripping insulation: no need soldering or peeling off wire shell or waterproof cover;For strip to- strip connection: place the front side of the light strip on the pointed pins while keeping the + aligned, Insert the wires to the holes respectively while keeping the positive poles aligned, then buckle the transparent cover; For led strip to wire extension, then close the cover with a plier to make a firm connection.
Tight and stable connection: the led strip light connector’s metal pins pierce through the front side of light strip or the wires to make a stable connection;The transparent cover design makes the connection process visible and reduce the dark areas.
What you get:10 pcs four pin transparent led strip lights connectors; 1 piece of 16. 4 feet rgb led strip extension cable; 1 piece screwdriver; If you have any issues, inquiries oor need assistance, please do not hesitate to contact us directly.
Upgrade connectors for both non-waterproof and waterproof rgb led strips: those 4 pin led light strip connectors work for both 10mm wide 4pin waterproof and non-waterproof led rgb light strips; compatible with 5V, 12V, 24V 4 pins RGB LED light strips; NOT compatible with 4 pin RGBIC led light strips; Not applicable to 8 mm wide rgb LED strips. Multi-purpose: strip-to-wire extension/strip-to-strip jumper; those solderless connectors can connect 10mm 4pin RGB LED strips and 22 AWG 4 pin wires; The rgb led strip light extension cable is perfect for connecting or extending LED RGB strip or do other diy led projects.
10. Nelyeqwo #ad
12 Pack Solderless 4 Pin Conductor Strip to Power Adaptor Strip to Controller Jumper for 10mm Wide Waterproof LED Lights Strip Tape, Nelyeqwo 5050 RGB 4 Pin 10mm LED Connectors kit #adNelyeqwo #ad
- Note: the led connectors is suitable for 10mm 5050/3528 RGB LED light strips. Durable and flexible, Upgraded clasp keeps stable connection. Operating conditions: the rgb led strip light connectors support maximum wattage of 72W, and 0-24V voltage input.
Superior quality: made of pbt material, high temperature resistance and fireproof, ensure personal safety. Suitable for most families. Package includes: 12x 5050 rgb 4 pin conductor strip to Power Adaptor for 10mm Wide Waterproof and non-waterproof LED Lights Strip Tape.
The wire can be easily bent into the desired shape. Easy to install: solderless, save time. Make sure the positive connection is correct for use with 5050/3528 4 pin 10mm RGB LED strip light connectors, no need other tools, plug and play. Need to strip the silicone on the contact area when used for waterproof LED strips.