FERRODAY Magnetic Drive Pump Wort Pump Food Grade High Temperature Stainless Head Magnetic Pump 15RM with 1/2″NPT thread Home Brew

#ad
FERRODAY . #ad - Realized a high efficiency smooth running, which has damping and anti-Vibration function, and excellent quiet circulation. Solid magnetic pump】 : fully-sealed magnetic pump, motor with connecting the magnetic shaft and magnetic propeller, all magnetically coupled for enhanced operation. Great heat resistant up to 120℃/ 248℉.

Easy to use】 : prime by running liquid through the pump prior to turning it on; The liquid travels from the bottom of the valve into the pump, and once the pump is powered on, the propeller will start to circulate the liquids; Perfect for transferring and circulation. Life time service】we are committed to offer you high quality product as well as superior service! Please feel free to tell us if any problems, we would try our best to satisfy you.

FERRODAY Magnetic Drive Pump Wort Pump Food Grade High Temperature Stainless Head Magnetic Pump 15RM with 1/2"NPT thread Home Brew #ad - Please note: moving giant vessel with hot wort yourself is not safe. Quiet and efficient】 : the pump's main shaft is separated from the impeller, aim to reducing the influence of motor vibration on the pump. Lifetime technical support. Stainless steel head, plastic head 1/2"npt thread, magnetic pump 15r, 110V Barb Ending are available Max Capacity: 16/19 L/min Rated Capacity: 8/12 L/min Max Head :2.

7/3. 4 meter rated Head:1. 5 meter package:1*magnetic drive pump safely transfer liquid】 : transferring liquids is an important part of any brew operation, and the most easy and safe way to transferring liquids is to attach this magnetic pump, the propeller will magnetically circulates liquids for you.

#ad



1/2" FPT TO 1/2" BARB - Stainless Steel

#ad
Home Brew Stuff H618B #ad - 1/2" FPT TO 1/2" BARB - Stainless Steel #ad - Works with 1/2 inch. 1/2" fpt on one side, with a 1/2" barb on the other. If you are not using a qd set or a ball Valve, this is a handy piece of Stainless for a direct connection. Plastic construction. 1/2fpt on one side, with a 1/2Barb on the other. Use this fitting for connecting tubing directly to your pump.

#ad



10 ft. - Midwest Homebrewing and Winemaking Supplies PRECUT 1/2" ID Silicone Tubing

#ad
Midwest Homebrewing and Winemaking Supplies HOZQ8-1135 #ad - 10 ft. - Midwest Homebrewing and Winemaking Supplies PRECUT 1/2" ID Silicone Tubing #ad - Precut 1/2 inch iD silicone tubing - 10 ft. Precut 1/2 inch id silicone tubing, feature: 10 ft. High Temp tubing. Works with 1/2 inch. Precut 1/2 inch. 1/2fpt on one side, with a 1/2Barb on the other. Precut 1/2 inch iD silicone tubing - 10 ft. Country of origin - united States, manufacturer name - Midwest home brewing and winemaking supplies.

Plastic construction. Feature: 10 ft. High temp tubing.

#ad



Concord 304 Stainless Steel Quick Disconnect Barb Hose with MPT Set. Home Brewing Mash Tun. 2 Pack Barb Female/MPT Male

#ad
Concord Cookware #ad - Concord 304 Stainless Steel Quick Disconnect Barb Hose with MPT Set. Home Brewing Mash Tun. 2 Pack Barb Female/MPT Male #ad - Works with 1/2 inch. Quick disconnect allows easy disconnecting and sanitizing with just a push of a lever. High temp silicon gasket in each QD fitting for a water tight seal. All parts made with solid 304 Stainless Steel. Built to last a lifetime. Parts disconnect in literally one second. Includes: 1/2" barb female fitting x2, 1/2" MPT Male fitting x2.

2 pack Plastic construction. Quick disconnect fitting set allows for fast removal of tubing. Makes sanitation a breeze. 1/2fpt on one side, with a 1/2Barb on the other. Precut 1/2 inch. Feature: 10 ft. High temp tubing.

#ad



Concord 304 Stainless Steel 1/2" Barb to 1/2" Female FPT Fitting. Great for Home Brewing 2

#ad
Concord Cookware #ad - 1/2" barb hose to 1/2" FPT. 1/2fpt on one side, with a 1/2Barb on the other. 2 pack. Works on all 1/2" Fittings. Great for home brewing. Quick disconnect allows easy disconnecting and sanitizing with just a push of a lever. High temp silicon gasket in each QD fitting for a water tight seal. Built to last a lifetime.

Works with 1/2 inch. Precut 1/2 inch. Parts disconnect in literally one second. Includes: 1/2" barb female fitting x2, 1/2" MPT Male fitting x2. Cast 304 stainless Steel Fitting. Connects to pipe with 1/2" ID. 1/2" barb hose to 1/2" FPT Fitting Plastic construction. All parts made with solid 304 Stainless Steel. Feature: 10 ft.

Concord 304 Stainless Steel 1/2" Barb to 1/2" Female FPT Fitting. Great for Home Brewing 2 #ad - High temp tubing.

#ad



Concord 304 Stainless Steel Quick Disconnect Barb Hose with MPT Set. Home Brewing Mash Tun. 2 Pack Barb Female/FPT Male

#ad
Concord Cookware #ad - 1/2" barb hose to 1/2" FPT. All parts made with solid 304 Stainless Steel. Built to last a lifetime. Works on all 1/2" Fittings. Connects to pipe with 1/2" ID. Built to last a lifetime. Quick disconnect allows easy disconnecting and sanitizing with just a push of a lever. High temp silicon gasket in each QD fitting for a water tight seal.

1/2fpt on one side, with a 1/2Barb on the other. 2 pack. Makes sanitation a breeze. Works with 1/2 inch. Quick disconnect fitting set allows for fast removal of tubing. Precut 1/2 inch. Feature: 10 ft. High temp tubing. Parts disconnect in literally one second. Includes: 1/2" barb female fitting x2, 1/2" MPT Male fitting x2.

Concord 304 Stainless Steel Quick Disconnect Barb Hose with MPT Set. Home Brewing Mash Tun. 2 Pack Barb Female/FPT Male #ad - Cast 304 stainless Steel Fitting. All parts made with solid 304 Stainless Steel. Great for home brewing. Quick disconnect allows easy disconnecting and sanitizing with just a push of a lever. High temp silicon gasket in each QD fitting for a water tight seal.

#ad



HFSR Homebrew Beer Wort Chiller 7.5'' 2.9''/30 plate, 3/4" x 1/2" NPT

#ad
HFS BREW-PL-CHILL #ad - Great for home brewing. 1/2fpt on one side, with a 1/2Barb on the other. Built to last a lifetime. Connects to pipe with 1/2" ID. 1 year Warranty. Precut 1/2 inch. Cools 10 gallon batches from 212F to 75F in 10 minutes. Hfs plate chillers are made of high-grade 304 stainless steel and brazed with 99. 9% copper. Quick disconnect allows easy disconnecting and sanitizing with just a push of a lever.

HFSR Homebrew Beer Wort Chiller 7.5'' 2.9''/30 plate, 3/4" x 1/2" NPT #ad - High temp silicon gasket in each QD fitting for a water tight seal. Feature: 10 ft. High temp tubing. Wort-in and wort-out connections are 1/2" NPT fittings while the water-in and water-out fittings are 3/4" standard garden hose. Works with 1/2 inch. 321f to 392f temperature range - Max PSI 145. Parts disconnect in literally one second.

Includes: 1/2" barb female fitting x2, 1/2" MPT Male fitting x2. Cast 304 stainless Steel Fitting. Built to last a lifetime. The a series of plate chillers measures 2. 9" x 7.

#ad



White SiliconeTubing, 1/2"ID, 3/4"OD, 1/8"Wall, 10' Length

#ad
Small Parts #ad - Built to last a lifetime. Plastic tubing is used in a wide variety of industries, laboratory, automotive, such as agriculture, and medicine. It is made of silicone rubber which is nonreactive, flexible, and resistant to high temperatures. 1 year Warranty. This white tubing meets National Sanitation Foundation NSF-51 standards for food equipment material.

1/2" barb hose to 1/2" FPT. All parts made with solid 304 Stainless Steel. Applications for plastic tubing include blood and fluid handling, and food and beverage handling, electrical and thermal insulation, peristaltic pumps, analytical systems, among others. Precut 1/2 inch. Great for home brewing. Parts disconnect in literally one second.

White SiliconeTubing, 1/2"ID, 3/4"OD, 1/8"Wall, 10' Length #ad - Includes: 1/2" barb female fitting x2, 1/2" FPT Male fitting x2. 304 stainless with 99. 9% copper Brazing. 1/2fpt on one side, with a 1/2Barb on the other. 2 pack. Silicone is resistant to ozone, hydraulic fluids that resist fire, engine and transmission oil, detergent, non-petroleum brake fluid, salt water, vegetable and animal oils, weather, and high molecular weight chlorinated aromatic hydrocarbons.

#ad



Midwest Homebrewing and Winemaking Supplies PRECUT 1/2" ID Silicone Tubing 2-10 Feet Coils

#ad
Midwest Homebrewing and Winemaking Supplies #ad - 321f to 392f temperature range - Max PSI 145. Cools 10 gallon batches from 212F to 75F in 10 minutes. 2 pack. Pre-cut Coils. Quick disconnect allows easy disconnecting and sanitizing with just a push of a lever. High temp silicon gasket in each QD fitting for a water tight seal. Great for home brewing. Quick disconnect allows easy disconnecting and sanitizing with just a push of a lever.

Midwest Homebrewing and Winemaking Supplies PRECUT 1/2" ID Silicone Tubing 2-10 Feet Coils #ad - High temp silicon gasket in each QD fitting for a water tight seal. All parts made with solid 304 Stainless Steel. Food grade, 500 F Max Temp Rating. Parts disconnect in literally one second. Includes: 1/2" barb female fitting x2, 1/2" MPT Male fitting x2. Cast 304 stainless Steel Fitting. 1/2fpt on one side, with a 1/2Barb on the other.

Operating temperature range of -150 to +500 degrees F. Parts disconnect in literally one second. Includes: 1/2" barb female fitting x2, 1/2" FPT Male fitting x2. 304 stainless with 99.

#ad



Horiznext 1/2" homebrew ball valve stainless steel weldless bulkhead for Home Brewing Kettle

#ad
#ad - Flexible tubing for air, food, water, and beverage. Silicone rubber for resistance to high temperatures, detergents, oils, ozone, and salt water. Translucent for visual inspection of fluids. The homebrew ball valve is excellently designed and proven reliable. All parts made with solid 304 Stainless Steel. Color: Semi-Transparent.

Horiznext 1/2" homebrew ball valve stainless steel weldless bulkhead for Home Brewing Kettle #ad - If you have any question or dissatisfaction about the products, pls contact us. Maximum working pressure:20000 psi. Plastic construction. Cools 10 gallon batches from 212F to 75F in 10 minutes. 1/2" barb hose to 1/2" FPT. Easily installs onto your weldless homebrew kettle setup. Precut 1/2 inch. Quick disconnect allows easy disconnecting and sanitizing with just a push of a lever.

High temp silicon gasket in each QD fitting for a water tight seal. All parts made with solid 304 Stainless Steel. Works on all 1/2" Fittings. Quick disconnect allows easy disconnecting and sanitizing with just a push of a lever. High temp silicon gasket in each QD fitting for a water tight seal.

#ad



Home Brew Fitting 304 Stainless Steel Pack of 2 - DERNORD 1/2" Barbed Hose x 1/2" NPT Female

#ad
DERNORD #ad - Working temperature: -212 to +1472 degrees ℉. Connects to pipe with 1/2" ID. Plastic construction. Pre-cut Coils. Made of stainless steel 304, heavy duty, durable and corrosion resistance. High temperature silicon seals. 1/2" npt national pipe taper threads x 1/2" inner diameter hose. It has a temperature range from -30 to +150 degrees F and a maximum working pressure of 150 pounds per square inch psi.

Maximum working pressure of 150 psi. Color: Semi-Transparent. This fitting is made of 304 stainless steel for strength and resistance to corrosion. 2 pack. Works on all 1/2" Fittings. 2. 9"w x 7. 5"l x 30 plates 3. 5"h - 1/2"npt wort fitting x 3/4" NPT Water Fitting. Maximum working pressure:20000 psi. Great for attaching 1/2" inner diameter hose, and 1/2" ball valve.

Home Brew Fitting 304 Stainless Steel Pack of 2 - DERNORD 1/2" Barbed Hose x 1/2" NPT Female #ad - . Quick disconnect allows easy disconnecting and sanitizing with just a push of a lever.

#ad